真空压铸,vacuum die casting
1)vacuum die casting真空压铸
1.Design and optimization of runner and gating systems forvacuum die casting of magnesium through numerical simulation;基于数值模拟的镁合金真空压铸浇注系统设计与优化
2.Design and Manufacture of Vacuum Die Casting Mould for Belt Wheel Part;带轮真空压铸模设计与制造
英文短句/例句
1.Design method of the vacuum die-casting mould for large-scale thin shell part大型薄壁件真空压铸模具的设计方法
2.Research on the Exploitation of Aluminum Alloy Vacuum Die-casting Part for the Lightweight Coach Body轻量化客车车身铝合金真空压铸杆件开发研究
3.Study of vacuum die casting process of aluminum alloy automotive steering gear housing铝合金汽车转向器壳体真空压铸工艺研究
4.Effects of Vacuum Die Casting Processing Parameters on Mechanical Properties of AM50 Magnesium Alloy真空压铸工艺参数对AM50镁合金力学性能的影响规律
5.Relationship Between Porosity Distribution and Mechanical Properties of Vacuum Die Casting AM50 Magnesium AlloyAM50镁合金真空压铸件孔洞分布与力学性能的关系
6.Mould filling of low-pressure expendable pattern casting process for magnesium alloys镁合金真空低压消失模铸造充型特征
7.Application of Vacuum and Partial Pressurization in Die Casting Automobile Components抽真空及局部增压工艺在压铸生产上的实践
8.Process and Theory of Vacuum Counter-pressure Casting Thin-wall Aluminum Alloy Castings Based on Intelligent Control;智能控制的薄壁铝合金铸件真空差压铸造工艺与理论
9.Study on Adjusted Pressure Casting Process with Electromagnetic and Vacuum for Aluminum Alloy Casting of Complicated & Thin-wall Components复杂薄壁铝合金铸件磁动力真空调压铸造工艺研究
10.Research on Common Defects of Low-pressure Expendable Pattern Casting Process for Magnesium Alloy镁合金真空低压消失模铸造常见缺陷分析
11.Pressure-expendable Pattern Casting Process for Magnesium Alloy镁合金真空低压消失模铸造的技术特征与实践
12.Modeling and Analysis of Vacuum Counter-Pressure Casting Based on Digital Combination Valve基于数字组合阀的真空差压铸造系统建模分析
13.Design of the Intelligent Vacuum Counter-pressure Casting Control System Based on PCI bus基于PCI总线的真空差压铸造控制系统设计
14.3D Design and Automation of Vacuum and Low Pressure-Expendable Pattern Casting Process Product Line真空低压镁合金消失模铸造生产线的三维设计及自动控制
15.Study on the Influencing Factors and Filling Ability of Magnesium Alloys in the Lost Foam Casting(LFC) with Vacuum and Low Pressure镁合金真空低压消失模铸造影响因素及充型能力的研究
16.Selection of Vacuum Pump and Capacity Calculation of Dust Separator in Lost Foam and V-process Casting消失模与V法铸造用真空泵的选型和负压罐的计算
17.Analysis on Thermodynamics and Kinetics of Vacuum Degassing from Aluminum Melt during Adjusted Pressure Casting调压铸造中铝液真空除气的热力学和动力学分析
18.vacuum transducer [sensor]真空[负压] 传感器
相关短句/例句
Vacuum die-casting真空压铸
1.Design method of the vacuum die-casting mould for large-scale thin shell part大型薄壁件真空压铸模具的设计方法
2.Design of vacuum die-casting mould for large-scale thin shell parts大型薄壁件真空压铸模具设计
3.Vacuum Die-casting Assistant System is the key equipment of the application which has a direct impact on the production efficiency and the casting quality.随着汽车轻量化对铝合金压铸件的需求增加及质量要求的提高,对真空压铸技术的推广应用越来越迫切。
3)High Vacuum Die Casting高真空压铸
1.Development and Application ofHigh Vacuum Die Casting in Aluminum Alloy;铝合金高真空压铸技术的开发及应用
4)vacuum counter-pressure casting真空差压铸造
1.Solidification feeding behavior and model ofvacuum counter-pressure casting technology;真空差压铸造工艺的凝固补缩特性与模型
2.The hardware structure and working principle ofvacuum counter-pressure casting microcomputer control system was introduced,and the circuit of pressure detection,the regulating valve control and serial communication I/O were designed.介绍了微电脑真空差压铸造控制系统的组成及工作原理,设计了压力检测电路、调节阀控制电路和串行通信接口电路,同时说明了系统的调试,并给出了实验结论。
3.Visual interface of VCPC-1vacuum counter-pressure casting intelligent control is employed by using Delphi language,which appears in the form of window,moreover,it realizes short range control of hypogynous machine and long-distance control of epigynous machine.采用Delphi语言开发了VCPC-1真空差压铸造智能控制的可视化界面,界面以视窗形式弹出,实现了下位机的近程控制和上位机的远程控制;并生产了最小壁厚1mm以下的复杂薄壁铸件。
5)vacuum low-pressure casting真空低压铸造
1.EPC-V, vacuum suction casting,vacuum low-pressure casting and vacuum differential pressure casting are reviewed and discussed.通过分析真空铸造在造型、充型、凝固过程中产生的现象,讨论了真空密封造型、实型真空铸造、真空吸铸、真空低压铸造、真空差压铸造等技术的现状,针对国内外发展现状提出今后真空熔模吸铸的研究与发展的方向。
6)vacuum differential pressure casting真空差压铸造
1.Production of Complicated and Thin-Walled Aluminum Alloy Castings by Vacuum Differential Pressure Casting;用真空差压铸造法生产复杂薄壁铝合金铸件
2.EPC-V, vacuum suction casting, vacuum low-pressure casting andvacuum differential pressure casting are reviewed and discussed.通过分析真空铸造在造型、充型、凝固过程中产生的现象,讨论了真空密封造型、实型真空铸造、真空吸铸、真空低压铸造、真空差压铸造等技术的现状,针对国内外发展现状提出今后真空熔模吸铸的研究与发展的方向。
延伸阅读
J1113压铸机操作规程理论生产率：180次/时1、遵守《铸造设备通用操作规程》有关规定。2、检查油箱内的机油量，如果油面低于油标的上限部位，就加入干净的20号机械油。3、一般不准空压射，如必须空压射时，一定要在压射室中放入软质垫料（如棉丝、铅块等），以防损坏设备。4、按下面顺序起动设备，进行空载试车：a、 打开贮压缸伐和它上端的两个小截门；b、 拉出手操纵伐的的柄；c、 打开空气开关，接通电源，转动主令开关，使设备能点动运转；d、 启动电动机，待其运转正常后，再推入手柄操纵伐的手柄，使高压泵升压，然后按动各电钮，点动试车。设备经过空运转，确认一切正常后，方可进行生产。5、切实注意安全，操作者必须穿戴好劳保用品，不得站在正对着压铸分型面的部位，以防铝溅出，发生烧伤事故。6、经常观察各种仪表读数是否符合工艺要求，设备的运动是否正常，如发现异常现象，立即按动中停按钮或停泵按钮，然后对设备进行检查。必要时，通知维修人员修理。7、经常注意液压油的温升，油温量最设法得超过55°С，否则开动冷凝器进行冷却。1、 设备停歇一小时以上时，必须切断电源，关闭贮压伐，防止产生错误动作和消耗贮压缸压力。2、 工作后，按下列顺序停车：先拉出手柄操作伐的手柄，然后关泵停车，切断电源，接着关闭贮压缸伐及其上端的两个小截门，并堆入手柄操纵伐的手柄。10、设备清理后，设备的运动部分（如缸杆、导杆、滑轨等）还须涂一层薄机械油。
