第一句子网 - 唯美句子、句子迷、好句子大全
第一句子网 > 预制式压裂 prefabrication fracturing英语短句 例句大全

预制式压裂 prefabrication fracturing英语短句 例句大全

时间:2024-02-24 23:32:16

相关推荐

预制式压裂 prefabrication fracturing英语短句 例句大全

预制式压裂,prefabrication fracturing

1)prefabrication fracturing预制式压裂

2)pressure precast pile-stinking静压式预制桩

3)precracking预压裂

1.Due to the cracks of cement stabilized base material which reflect to pavement under the load and become reflective cracks,theprecracking technology is applied for treatment on semi-rigid base,which greatly reduces the amount and severity of shrinkage cracks.由于水泥稳定基层材料产生收缩裂缝,在荷载作用下容易反射到路面,形成反射裂缝,采用半刚性基层预压裂技术对其进行处理,可以大大减少收缩裂缝的数量和严重程度。

英文短句/例句

1.Construction Quality Control of Precracking Technology for Semi-rigid Base半刚性基层预压裂技术施工质量控制

2.Causes Analysis and Prevention of Cracks in Compounding Method of Vacuum Drainage and Water Preloading真空排水联合覆水预压裂缝成因分析及防治

3.A New Productive Prediction Method of Horizontal Fracture Wells in Hydraulic Fracturing水力压裂水平裂缝井产能预测新方法

4.Prediction of Burst Strength of Oil Well Casing Strings with Micro-Cracks含微裂纹油井套管的抗内压断裂强度预测

5.PREDICTION AND ASSESSMENT OF FRACTURE HEIGHT OF HYDRAULIC FRACTURING WITH LOGGING DATA利用测井资料预测判断水力压裂裂缝高度

6.The Prediction Influence of Hydraulic Fracture and Chasm on Operation State预测水力压裂和裂缝对工作状态的影响

7.Research on the parameter optimization of the preset crack"s fracturing slot and ground test预置裂缝压裂割缝参数优选及地面试验研究

8.Prediction of radial crack of the workpiece during the splitting spinning based on ductile fracture criteria采用韧性断裂准则预测分形旋压径向开裂

9.The Research of Sand Preventing after Fracturing to Polymer-flooding Producer预防聚驱采出井压裂后出砂方法研究

10.The Testing Study on the Concrete Anticrack Property of the Qi-Nen-Bridage Box Beam Web under the Partical Pressure of the Prestresing Anchorage预应力箱梁锚下混凝土局压抗裂性能试验研究

11.The In-situ Experiment of Inefficient Fracturing Prevention for Polymer-flooding Producer聚驱采出井压裂无效预防方法现场试验

12.Production Prediction Method Study for Fractured Gas Well in Xushen 6 Block徐深6区块开发气井压裂产量预测方法研究

13.Rock mechanical parametric experiments and the research of formation fracture pressure prediction岩石力学参数试验与地层破裂压力预测研究

14.STUDY OF PREDICTION OF FRACTURING PARAMETER BY BP NEURAL NETWORKBP神经网络预测压裂井施工参数的研究

15.HAZARD ANALYSIS OF MEDIUM PRESSURE HYDROCRACKING UNIT AND THE PREVENTIVE MEASURES中压加氢裂化装置危险性分析及预防措施

16.The Research of Prediction Technology for Pore Pressure and Fracture Pressure in Talaha Area;他拉哈地区地层孔隙压力及破裂压力预测技术研究

17.Predicting the production of fracturing acidizing of carboniferous system in east Sichuan by using geologic logging parameter利用地质测井参数预测川东石炭系压裂酸化后的产量

18.The Study of Proppant Discharge Mechanism and Prediction Methods in Polymer Flooding Oil Wells;聚驱油井压裂后支撑剂排出机理与预测方法研究

相关短句/例句

pressure precast pile-stinking静压式预制桩

3)precracking预压裂

1.Due to the cracks of cement stabilized base material which reflect to pavement under the load and become reflective cracks,theprecracking technology is applied for treatment on semi-rigid base,which greatly reduces the amount and severity of shrinkage cracks.由于水泥稳定基层材料产生收缩裂缝,在荷载作用下容易反射到路面,形成反射裂缝,采用半刚性基层预压裂技术对其进行处理,可以大大减少收缩裂缝的数量和严重程度。

4)controlled blasting控制预裂

1.Effects ofcontrolled blasting and pre-splitting blasting on latter blasting holes;控制预裂和后爆孔的空孔作用

5)pre-existing crack预制裂纹

1.Experiments were carried out to study coarse marble with discontinuouspre-existing cracks under conventional triaxial compression by the MTS815.03岩石力学伺服试验机上对断续预制裂纹粗晶大理岩进行常规三轴压缩试验,基于试验结果研究不同围压下断续预制裂纹粗晶大理岩的变形和强度特性。

2.Rock Failure Process Analysis(RFPA) code is used to study the failure process of rock disks withpre-existing cracks under dynamic loading.本文利用岩石破裂过程分析系统(RFPA)研究了含有不同角度预制裂纹的岩石试样在动态载荷作用下的破坏过程。

3.Rock failure process analysis (RFPA) code is used to study the failure process of rock disks withpre-existing cracks when subjected to static loading.数值模拟再现了含不同预制裂纹角度时巴西盘试样所表现出不同的破裂模式以及主裂纹的产生、扩展、贯通、次生裂纹的产生等过程,得到的破裂模式结果与有关文献中的实验结果十分吻合。

6)Crack preparation裂纹预制

1.Crack preparation and characterization of Al_2O_3-MgAlON composite sintered under normal pressure;研究了裂纹预制方法、试样的粒度组成以及获得维氏压痕时的载荷大小和保压时间对裂纹形状和尺寸的影响,愈合温度对压痕愈合情况及试样抗折强度的影响,并计算了维氏压痕的愈合速率。

延伸阅读

预制1.预先制造的。

本内容不代表本网观点和政治立场,如有侵犯你的权益请联系我们处理。
网友评论
网友评论仅供其表达个人看法,并不表明网站立场。