等温固化,isothermal cure
1)isothermal cure等温固化
1.It was found that the increase of E′ duringisothermal cure process at high temperatures is different from the one at low temperatures.采用动态力学分析法(DMA)对648环氧预浸料的等温固化过程进行了表征分析。
英文短句/例句
1.Dynamic mechanical analysis of isothermal curing of epoxy prepreg用DMA研究环氧预浸料的等温固化过程
2.Non-isothermal cure kinetics of V-POSS/UPR and physical propertiesV-POSS/UPR非等温固化动力学与物理性能
3.On the Mixed-Boundary Value Problem in the Equilibrium State of the Model for the Isothermal Solidification Process of a Binary Alloy;一类二元合金等温固化模型平衡态的混合边值问题
4.Study on non-isothermal curing kinetics of unsaturated polyester resin with complex initiation system不饱和聚酯/复合引发体系非等温固化动力学研究
5.Grain Refinment of AM60B+XCa Magnesium Alloys and Microstructure Evolution during Semi-solid Isothermal TreatmentAM60B+XCa的细化及在半固态等温处理中组织的演化
6.The time-temperature equivalence of the adhesive is confirmed.同时胶粘剂的固化时间和温度存在等效性关系。
7.Isothermal Crystallization Kinetics of Dynamically Cured PP/MAH-g-PP/Epoxy Blends动态固化PP/MAH-g-PP/EP共混物的等温结晶动力学
8.Curing Kinetics of HTPB/TDI/Al System by Non-isothermal DSC非等温DSC研究Al/HTPB/TDI体系的固化反应动力学
9.Curing Kinetics of Bisphenol-A Epoxy Resin with Polyamide by Isothermal Differential Scanning Calorimetry等温DSC法研究聚酰胺与环氧树脂的固化动力学
10.Preparation and Characterization of Solid Electrolyte and Other Materials Used in Intermediate Temperature Solid Oxide Fuel Cell;中温固体氧化物燃料电池用电解质等材料的制备及性能研究
11.Microstructure Evolution of Ti14 Alloy during Isothermal ProcessTi14合金半固态等温热处理过程中的组织演化规律
12.Nonisothermal Cure Kinetics of a High Toughness and Low Volume Shrinkage Ratio Epoxy System非等温DSC法研究高韧性低收缩环氧体系固化动力学
13.e package RTV silicon rubber单包装保温固化硅橡胶
14.Effects of temperature and holding time on the semi-solid isothermal heat-treated microstructure of ZL104 aluminum alloy等温温度和时间对ZL104铝合金半固态等温热处理组织的影响
15.Molecular dynamics simulation of liquid Cu during isothermal solidification液态Cu等温凝固的分子动力学模拟
16.Synthesis and Thermochemical and Non-isothermal Thermal Decomposition Kinetic Studies on Gd(Ala)_3(Gly)2Cl_3·2H_2O (s);氯化钆与L-丙氨酸和甘氨酸三元固态配合物的合成及热化学和非等温热分解动力学研究
17.isothernal transformation case hardening等温转变表面硬化处理
18.Study on curing reaction kinetics of low temperature curable BMI modified by PESPES改性低温固化双马树脂固化动力学研究
相关短句/例句
nonisothermal curing非等温固化
3)isothermal solidification等温凝固
1.Dynamic simulation ofisothermal solidification in steel/Cu/steel system rolling-diffusion bonding process;碳钢/Cu/碳钢系统轧制——扩散复合等温凝固过程的动力学模拟计算
2.Simulation ofisothermal solidification of ternary alloy with phase-field model;三元合金等温凝固过程的相场法模拟
3.Phase-field simulation ofisothermal solidification of binary alloy based on KKS model;基于KKS模型二元合金等温凝固过程的相场法模拟
4)semi-solid isothermal heat-treatment process等温半固态
5)non-isothermal solidification非等温凝固
1.Phase-field simulation of influence of anisotropy on process ofnon-isothermal solidification;各向异性影响非等温凝固过程的相场法模拟
2.Phase-field Simulation of Non-isothermal Solidification of Binary Alloy;二元合金非等温凝固过程的相场法模拟
3.Phase-field simulation ofnon-isothermal solidification dendrite growth of binary alloy under the force flow强迫对流影响二元合金非等温凝固枝晶生长的相场法模拟
6)semisolid soaking半固态等温
延伸阅读
35CrNi3MoV钢等温淬火组织35CrNi3MoV钢等温淬火组织35CrNi3MoV钢等温淬火组织马氏体(绿)+见氏体(棕)残余奥氏体(浅黄)
