抗拉剪切强度,tensile and shear strength
1)tensile and shear strength抗拉剪切强度
1.Experiment ontensile and shear strength of front fillet welded joint post-high-temperatures高温后正面角焊缝抗拉剪切强度的试验
英文短句/例句
1.Experiment on tensile and shear strength of front fillet welded joint post-high-temperatures高温后正面角焊缝抗拉剪切强度的试验
2.Testing Method for Tensile and Shear Strength of High Strength Photosensitive Glue高强度光敏胶拉伸剪切强度测试方法
3.testing methods for shear strength of adhesive bonds by tensile loading用拉伸负荷测定粘合剂剪切强度
4.Ebonite--Method of test for shearing strengthGB/T1700-1982硬质橡胶抗剪切强度试验方法
5.testing methods for strength properties of adhesives for wood in shear by tension loading胶粘剂拉伸剪切强度测定方法 (木材对木材)
6.Study on Correlation between Shear-wave Velocity and Liquefaction Resistance of Saturated Sand;饱和砂土剪切波速与抗液化强度相关性的研究
parison of Shear Bond Strength of Orthodontic Resin Brackets under Different Conditions in Vitro;树脂托槽在不同条件下抗剪切强度的体外研究
8.Shear Bond Strength of Orthodontic Brackets Bonded with a Self-etching Adhesive;自酸蚀粘接剂粘接抗剪切强度的实验研究
9.Effect of Chlorhexidine Application on Shear Bond Strength of Brackets Bonded with Fuji Ortho LC氯己定对FujiOrtho LC粘接托槽抗剪切强度的影响初探
10.Effect of sandblasting on shear bond strength between rebonded metal brackets and enamel喷砂处理对脱落托槽与牙面粘结的抗剪切强度
11.Study on Shear Strengths of Rock Structure Planes in Different Shearing Direction by Simulation Experiment岩体结构面不同剪切方向的抗剪强度模拟试验研究
12.Testing methods for impact shear strength of and tensile strength of adhesivesGB/T6328-1986胶粘剂剪切冲击强度和拉伸强度试验方法
13.Three-parameter Generalized Failure Criteria Based on Tension,Compression and Shear Uniaxial Strength基于拉伸、压缩、剪切单轴强度试验值的材料三参数广义强度准则
14.testing methods for shear strength of plastics by punch tool塑料剪切强度试验方法
15.uniform strain shearing strengh tester等应变剪切强度测试仪
16.Test method for apparent horizontal shear strength of pultruded glass fiber reinforced plastic rods by the short beam methodGB/T13096.4-1991拉挤玻璃纤维增强塑料杆表观水平剪切强度短梁剪切试验方法
17.Test method for in plane shear strength of pultruded glass fiber reinforced plastic rodsGB/T13096.3-1991拉挤玻璃纤维增强塑料杆面内剪切强度试验方法
18.The method for determination of strength properties of adhesive in shear by tension loading(Metal to metal)GB/T7124-1986胶粘剂拉伸剪切强度测定方法(金属对金属)
相关短句/例句
Anti tensile shearing strength抗拉伸剪切强度
3)shear strength抗剪切强度
1.The effect of crystal powder on theshear strength and expansion ratio of the crystal powder/epoxy resin composite by different composition and technology was studied systematically.对水晶粉/环氧树脂复合材料的抗剪切强度、热膨胀系数进行较系统的研究,并用扫描电镜(SEM)对水晶粉/环氧树脂复合材料断面显微结构进行了观察。
2.Gauging theshear strength,tensile strength and modulus,glass transition temperature of the composite and their change during the aging test.选用TDE-85和E-51作为主体树脂,制备了一种T700碳纤维复合材料,并对这种复合材料进行耐湿热老化研究,分别测定其抗剪切强度、抗拉伸强度及模量和玻璃化转变温度随老化时间的变化值。
3.This paper briefly introduces the use of the cable bolt anchoring technology, initially analyzes the anchoring mechanism of the fully bonded cable bolt in the jointed rock mass, and examines some factors affecting the tensile bond strength and theshear strength of the cable bolt in the jointed rock mass.简要介绍了锚索加固技术的应用，并对全长粘结式锚索在节理岩体中的锚固作用机理进行初步分析，同时对节理岩体中锚索加固的抗拉粘结强度及抗剪切强度的影响因素进行了分析。
4)shear bond strength抗剪切强度
parison onshear bond strength of edgewise brackets bonding with three orthodontic adhensives under different adhensive conditions;3种正畸秞质粘接剂在不同粘接条件下的抗剪切强度比较
2.Objective To observe theshear bond strength after different methods are adopted to deal with the enamel with fluoride.方法挑选因正畸需要而拔除的96颗双尖牙,随机分为对照组、酸蚀前加氟组、酸蚀液中加氟组、酸蚀后加氟组,粘接托槽后进行冷热循环实验,测定并记录托槽抗剪切强度及黏接剂残留指数计分评估。
3.Result:Theshear bond strengths were negative relative to the roughnes.各组处理后涂底涂剂,与硅橡胶粘结,测试其抗剪切强度,观察其破坏方式。
5)tensile shear strength拉伸剪切强度
1.MTS-810 testing apparatus and scanning electron microscope were used to study thetensile shear strength, elongation and microstructure of epoxy construction adhesive before and after the vacuum thermal cycling.采用MTS-810型材料试验机和扫描电子显微镜,研究了真空热循环下环氧结构胶粘剂拉伸剪切强度、延伸率和微观结构等变化规律。
2.In this paper,the influences of curing agent,low molecular polyamide,organophilic montmorillonite and nano-Al2O3 ontensile shear strength and erosion and wear resistance of epoxy resin coating were studied,the results showed that thetensile shear strength and the erosion and wear resistance of the coating can be improved obviously with organophilic montmorillonite and nano-Al2O3.研究了固化剂低分子聚酰胺、有机蒙脱土和纳米Al2O3的用量对环氧树脂胶粘涂层拉伸剪切强度和耐冲蚀磨损性能的影响。
6)tensile strength拉伸剪切强度
1.Polyurethane adhesives prepared from liquefied wood has thetensile strength of 5 MPa,which meets the application requirement.利用液化产物制备了聚氨酯胶黏剂,拉伸剪切强度达5 MPa,达到应用要求,为今后的工业化生产提供了依据。
2.The influence of the ratio of monomers and photoinitiator ontensile strength was discussed.本研究采用三种丙烯酸酯单体(M01、M02、M03)和一种紫外光引发剂(I01)配制了紫外光固化胶粘剂,探讨了不同原料配比对产品拉伸剪切强度的影响。
3.The data of adhesion andtensile strength showed that the water-based CPP paint can substitute for solvent-based CPP coating.从粘附力和拉伸剪切强度测定结果可以看出,用水性氯化聚丙烯代替溶剂型氯化聚丙烯是可行的。
延伸阅读
拉伸剪切粘接强度分子式：CAS号：性质：对粘接头试片的胶层施加拉伸剪切负荷，至接头破坏的最大负荷，除以粘接面积的值。也即在平行于胶层的载荷作用下，胶接试样破坏时，单位胶接面所承受的剪切力，用MPa表示。胶黏剂的拉伸剪切强度试验还常在高温或低温条件下进行。是胶黏剂主要的胶接强度指标，许多国家都有标准试验方法。
