压缩剪切强度,compressing shear strength
1)compressing shear strength压缩剪切强度
1.The results showed that: there was significant difference in drycompressing shear strength between radial and tangential glued blocks bonded with API adhesive.结果表明:柞木木材API胶粘剂弦/径面胶合试件常态压缩剪切强度存在着差异;柞木径切面API胶合试件的常态压缩剪切强度比弦切面胶合试件的常态压缩剪切强度高;径切面API胶合试件的常态压缩剪切强度是弦切面的1。
2.The results showed that drycompressing shear strength of Oak glue-laminated timber was the highest among Larch, Birch and Oak glue-laminated timber, then drycompressing shear strength of Birch glue-laminated timber was the second, and Larch was the lowest.描述了应用水性高分子异氰酸酯(API)胶粘剂制造的落叶松、桦木和柞木集成材的胶接性能,试验结果表明:柞木的常态压缩剪切强度最高,其次是桦木,最小的是落叶松。
3.The results showed that: drycompressing shear strength of quarter-sawn board of Larch was 1.首先，研究了落叶松、桦木和柞木不同的剖切方向对木材胶接性能的影响，试验结果表明：落叶松径切板胶合强度试件的常态压缩剪切强度是弦切板常态压缩剪切强度的1。
英文短句/例句
1.testing methods for strength properties of adhesives in shear by compression loading胶粘剂压缩剪切强度试验方法
2.Testing method for compressive shear strength of dowel joint by inorganic adhesivesGB/T11177-1989无机胶粘剂套接压缩剪切强度试验方法
3.Adhesives-Wood to wood adhesive bonds-Determination of shear strength by compression loadingGB/T17517-1998胶粘剂压缩剪切强度试验方法木材与木材
4.Three-parameter Generalized Failure Criteria Based on Tension,Compression and Shear Uniaxial Strength基于拉伸、压缩、剪切单轴强度试验值的材料三参数广义强度准则
5.EXPERIMENTAL RESEARCH ON BASIC MECHANICAL PROPERTIES OF GFRP BARS玻璃纤维增强聚合物筋压缩和剪切性能试验研究
6.testing methods for shear strength of plastics by punch tool塑料剪切强度试验方法
7.uniform strain shearing strengh tester等应变剪切强度测试仪
8.Test method for the punch-type of strength of glass fiber-reinforced plasticsGB/T1450.2-1983玻璃纤维增强塑料冲压式剪切强度试验方法
9.Shear Band of Compression Sample of Alloy BT16 after HydrogenationBT16钛合金渗氢压缩试样中的剪切带
10.An analysis of transition coherent structuresin convective Mach Number 0.4 compressible free shear flow可压缩自由剪切流混合转捩大涡模拟
11."Maximum shear Strength 63Kg/mm2(90,000psi) maximum (based on 75% yield) "剪切强度最大63Kg/mm2(90000psi)(为屈服强度的75%)
12.Testing Method for Tensile and Shear Strength of High Strength Photosensitive Glue高强度光敏胶拉伸剪切强度测试方法
13.Test method for shear strength of pressure sensitive adhesive tapes (adhesive layer to back side of the tape)GB/T7754-1987压敏胶粘带剪切强度试验方法(胶面对背面)
14.Artificial Neural Network Prediction of Effect of Voids on the Interlaminar Shear Strength of Carbon/epoxy Fabric Laminates孔隙对碳/环氧层压板层间剪切强度影响的神经网络预测(英文)
15.The Shear Compression Failure of TC4 Titanium Alloy at Different TemperaturesTC4钛合金在不同温度下的剪压缩失效
16.Structural Intensity of Piston Compressor活塞压缩机结构强度
17.MICROSTRUCTURE AND HARDNESS OF ADIABATIC SHEAR BANDS IN HIGH STRENGTH STEELS高强度钢中绝热剪切带的组织和硬度
18.Study on the formation of shear bands in BMGs by "in-situ" compression tests大块金属玻璃剪切带形成的“原位”压缩实验研究
相关短句/例句
Adhesion compression shearing strength粘接压缩剪切强度
3)shear strength by punch tool冲压式剪切强度
4)shear strength剪切强度
1.Onshear strength testing method of explosion cladding joint;爆炸复合接头剪切强度测试方法研究
2.Effect of magnetic field onshear strength of adhesively bonded single lap joint;外加磁场对粘接接头剪切强度的影响
3.Interfacial reaction andshear strength of Sn-Zn-Cu/Cu joints;Sn-Zn-Cu/Cu界面反应及剪切强度
5)shearing strength剪切强度
1.The adjustedshearing strength formula of rough rock joint;粗糙岩石节理剪切强度的修正公式
2.Effect of rosin contents of lead-free solder paste on theshearing strength of the weld spot;无铅焊膏中松香含量对焊点剪切强度的影响
3.Study of theshearing strengths of marine sediment in the China’s mining region;海底沉积物剪切强度的试验研究
6)shear bond strength剪切强度
1.Effect of different surface conditioning onshear bond strength of different types of luting cements to ceramics;瓷表面不同处理方法及粘结剂对全瓷剪切强度的影响
2.Study ofshear bond strength of light-cured and resin-reinforced glass ionomer cement immediately after bonding;光固化树脂加强型玻璃离子水门汀即刻剪切强度的测定
parative study on theshear bond strength of light-cured glass ionomer cement between etching and nonetching;酸蚀对树脂加强型玻璃离子抗剪切强度的影响
延伸阅读
层间剪切强度分子式：CAS号：性质：层压件和纤维增强复合材料中层与层之间的最大剪切强度。作用于面上的应力与面相平行。其值较小。如树脂为环氧体系，增强材料为玻璃纤维时，纤维方向的拉伸强度达103MPa，而层间剪切强度为40～50MPa。
