加工长度,finishing length
1)finishing length加工长度
2)maximum machining length最大加工长度
3)cutting step加工步长
4)makespan加工全长
1.Given a group of coupled-task job, the coupled-task problem asks to find a processing sequence and a corresponding schedule on a single machine with the objective of minimizing themakespan.给定一组耦合工件,要求确定这些工件在一台机器上的加工顺序及时间安排,使加工全长达到最小,这就是耦合工件组作业问题。
2.This paper deals with themakespan problem of flow shops with a transportation turntable,which is used for moving the jobs from any machine to the next machine,for moving the jobs from the entrance to the first machine,and for moving the jobs from the last machine to the entrance back as well.在本文中，我们证明，即使只有一台加工机器，带有转盘的流水作业的加工全长问题也是强ＮＰ困难的。
3.This paper is concerned with themakespan problem of scheduling groups of jobs in two machine open shop.讨论关于工件组的两机自由作业时间表的加工全长问题。
英文短句/例句
1.For the open? shop makespan problem, two properties of the operation chain of dense schedule are investigated.对于自由作业加工全长问题,研究了稠密时间表操作链的两个性质。
2.The industrial added value throughout the country shall be increased by 8-9%.全国工业增加值增长8-9%；
3.In 2002, the total value-added of the industrial sector was 4,593.5 billion yuan, up by 10.2 percent over the previous year.全年工业增加值45935亿元，比上年增长10.2%。
4.Industrial added value for the year is planned to increase by 11 percent.工业全年增加值计划增长11％。
5.In 1998, the total value-added of the industrial sector was 3,354.1 billion Yuan, up by 8.9 percent over the previous year.全年全部工业增加值33541亿元，比上年增长8.9%。
6.In 1998, the total value-added of the industrial sector was up by 8.9 percent over the previous year. Of this total, the growth of state-owned enterprises and joint-ownership enterprises where state held the controlling share was 4.9 percent.全年工业增加值比上年增长８．９％，其中国有及国有控股工业增长４．９％。
7.In the first half of this year, the complete value-added of industry is 970.3 billion yuan, up 9.4% over the same period of last year.上半年，全国完成工业增加值9703亿元，同比增长9.4%。
8.In 2001, the total added value of the industrial sector was 84.57 billion yuan, up 13.7 percent year-on-year.全年完成工业增加值845.7亿元，比上年增长13.7%。
9.Application of revisable long-stem femoral component in revision of total hip arthroplasty翻修型加长柄在人工全髋关节翻修术中的应用
10.Global Study on the Food-Processing Industry全球食品加工工业研究
11.The growth of the global economy is being accelerated.全球经济增长速度加快。
12.In the first half year, China achieved an industrial added value of RMB 970.3 billion nationwide, increased by 9.4%, with the growth amplitude increased by 1.5 percentage points comparing to the corresponding period.上半年，全国完成工业增加值9703亿元，增长9.4％，增幅同比提高1.5百分点。
13.In the first three quarters, the added value of industrial enterprises above the designated size totaled 2,248.7 billion yuan, up 12.2 percent on last year"s same period.前三季度，全国规模以上工业完成增加值22487亿元，比上年同期增长12.2%。
14.Research of Overall Structural Safety and Numerical Simulation of Reinforcing Construction for Long-term Operating Gravity Dam;长服役期重力坝整体安全性研究与加固施工数值仿真分析
15.Accelerate Pollution Control of Songhua River Basin Water Promote Sustainable Development of Whole Songhua River Basin加快长春市松花江流域水污染防治工作 促进全流域可持续发展
16.Intensify production dispatch management to ensure a safe, stable, long-term operation of chemical production system加强生产调度管理保证化工生产系统安全稳定长周期运行
17.Civil engineers are also busy extending the parallel taxiway and constructing, a security-compound wall and roads for use by security patrols.土木工程师同时还在忙于加长平行跑道，修一道安全围墙以及一条供安全巡逻人员使用的公路。
18.The annual completed industry added value for the whole province was 28.71 billion yuan, which increased 10.3% over the previous year.全年全省完成工业增加值二百八十七点一亿元，比上年增长百分之十点三。
相关短句/例句
maximum machining length最大加工长度
3)cutting step加工步长
4)makespan加工全长
1.Given a group of coupled-task job, the coupled-task problem asks to find a processing sequence and a corresponding schedule on a single machine with the objective of minimizing themakespan.给定一组耦合工件,要求确定这些工件在一台机器上的加工顺序及时间安排,使加工全长达到最小,这就是耦合工件组作业问题。
2.This paper deals with themakespan problem of flow shops with a transportation turntable,which is used for moving the jobs from any machine to the next machine,for moving the jobs from the entrance to the first machine,and for moving the jobs from the last machine to the entrance back as well.在本文中，我们证明，即使只有一台加工机器，带有转盘的流水作业的加工全长问题也是强ＮＰ困难的。
3.This paper is concerned with themakespan problem of scheduling groups of jobs in two machine open shop.讨论关于工件组的两机自由作业时间表的加工全长问题。
5)Processing to length定长加工
6)makespan加工总长
putational complexity of themakespan of the three-stage flow-shop with some batch machines;含有批处理机的三机流水作业加工总长问题的计算复杂性
2.In this paper, we investigate the computational complexity of themakespan of the three-stage flow-shop with some batch machines in some cases.本文研究含有批处理机的三台机器流水作业加工总长问题在某些情形下的计算复杂性。
3.It is conjectured that themakespan of any dense schedule is at most 2-1/ m times the optimalmakespan, where m is the number of machines.其加工总长与最优值之比具有上界 2 - 1 /m(m为机器数 ) ,是一个尚未证明的猜想。
延伸阅读
加工是指对货物进行再生产；受托加工货物，是指委托方提供原料及主要材料，受托方按照委托方的要求制造货物并收取加工费的业务。
