剪切强度,shear strength
1)shear strength剪切强度
1.Onshear strength testing method of explosion cladding joint;爆炸复合接头剪切强度测试方法研究
2.Effect of magnetic field onshear strength of adhesively bonded single lap joint;外加磁场对粘接接头剪切强度的影响
3.Interfacial reaction andshear strength of Sn-Zn-Cu/Cu joints;Sn-Zn-Cu/Cu界面反应及剪切强度
英文短句/例句
1.testing methods for shear strength of plastics by punch tool塑料剪切强度试验方法
2.uniform strain shearing strengh tester等应变剪切强度测试仪
3."Maximum shear Strength 63Kg/mm2(90,000psi) maximum (based on 75% yield) "剪切强度最大63Kg/mm2(90000psi)(为屈服强度的75%)
4.Testing Method for Tensile and Shear Strength of High Strength Photosensitive Glue高强度光敏胶拉伸剪切强度测试方法
5.Ebonite--Method of test for shearing strengthGB/T1700-1982硬质橡胶抗剪切强度试验方法
6.Thermal sprayed metallic coatings-Determination of shear strengthGB/T13222-1991金属热喷涂层剪切强度的测定
7.Testing methods for shear strength of plastics by punch tooGB/T15598-1995塑料剪切强度试验方法穿孔法
8.testing methods for shear strength of adhesive bonds by tensile loading用拉伸负荷测定粘合剂剪切强度
9.testing methods for strength properties of adhesives in shear by compression loading胶粘剂压缩剪切强度试验方法
10.The shear strenth is equal to the cohesion of substance.剪切强度等于物质的内聚力。
11.Test Attempt to Shear Strength of in Terface for Embedded Optical Fiber Sensors埋入式光纤传感器界面剪切强度实验
12.Effect of reflow soldering on IMC and shear strength of SnAgCu solder joint回流焊对SnAgCu焊点IMC及剪切强度的影响
13.Effects of particle shape on shear strength of discrete media颗粒形态对离散介质剪切强度的影响
14.Shear Strength of R/C Bridge Cantilever Slabs钢筋混凝土桥悬臂板的剪切强度分析
15.Study on Residual Shear Strength of Reinforced Concrete Bridge Columns under Strong Seismic Ground Movement;强震动下钢筋混凝土桥墩的残余剪切强度研究
16.Cellular plastics--Determination of shear strength of rigid materialsGB/T10007-1988硬质泡沫塑料剪切强度试验方法
17.testing methods for strength properties of adhesives for wood in shear by tension loading胶粘剂拉伸剪切强度测定方法 (木材对木材)
18.Testing method for compressive shear strength of dowel joint by inorganic adhesivesGB/T11177-1989无机胶粘剂套接压缩剪切强度试验方法
相关短句/例句
shearing strength剪切强度
1.The adjustedshearing strength formula of rough rock joint;粗糙岩石节理剪切强度的修正公式
2.Effect of rosin contents of lead-free solder paste on theshearing strength of the weld spot;无铅焊膏中松香含量对焊点剪切强度的影响
3.Study of theshearing strengths of marine sediment in the China’s mining region;海底沉积物剪切强度的试验研究
3)shear bond strength剪切强度
1.Effect of different surface conditioning onshear bond strength of different types of luting cements to ceramics;瓷表面不同处理方法及粘结剂对全瓷剪切强度的影响
2.Study ofshear bond strength of light-cured and resin-reinforced glass ionomer cement immediately after bonding;光固化树脂加强型玻璃离子水门汀即刻剪切强度的测定
parative study on theshear bond strength of light-cured glass ionomer cement between etching and nonetching;酸蚀对树脂加强型玻璃离子抗剪切强度的影响
4)shear bonding strength剪切强度
1.Evaluate ofshear bonding strength of a self-etching adhesive to dentine in different conditions;牙本质表面不同状态对自酸蚀体系剪切强度影响的实验研究
2.Objective:The aim of the study was to investigate the effects of different etching time onshear bonding strength to guide its clinical use.目的:研究不同酸蚀时间和不同施力方向对正畸托槽与牙面间剪切强度的影响。
3.To investigate the effects of different surface conditioning methods on theshear bonding strength of glass-infiltrated ceramic to dentine, 24 glass-infiltrated ceramic testing-pieces were divided into four groups randomly.用Super Bond与牙本质粘接 ,测其剪切强度。
5)shear strength抗剪切强度
1.The effect of crystal powder on theshear strength and expansion ratio of the crystal powder/epoxy resin composite by different composition and technology was studied systematically.对水晶粉/环氧树脂复合材料的抗剪切强度、热膨胀系数进行较系统的研究,并用扫描电镜(SEM)对水晶粉/环氧树脂复合材料断面显微结构进行了观察。
2.Gauging theshear strength,tensile strength and modulus,glass transition temperature of the composite and their change during the aging test.选用TDE-85和E-51作为主体树脂,制备了一种T700碳纤维复合材料,并对这种复合材料进行耐湿热老化研究,分别测定其抗剪切强度、抗拉伸强度及模量和玻璃化转变温度随老化时间的变化值。
3.This paper briefly introduces the use of the cable bolt anchoring technology, initially analyzes the anchoring mechanism of the fully bonded cable bolt in the jointed rock mass, and examines some factors affecting the tensile bond strength and theshear strength of the cable bolt in the jointed rock mass.简要介绍了锚索加固技术的应用，并对全长粘结式锚索在节理岩体中的锚固作用机理进行初步分析，同时对节理岩体中锚索加固的抗拉粘结强度及抗剪切强度的影响因素进行了分析。
6)shear bond strength抗剪切强度
parison onshear bond strength of edgewise brackets bonding with three orthodontic adhensives under different adhensive conditions;3种正畸秞质粘接剂在不同粘接条件下的抗剪切强度比较
2.Objective To observe theshear bond strength after different methods are adopted to deal with the enamel with fluoride.方法挑选因正畸需要而拔除的96颗双尖牙,随机分为对照组、酸蚀前加氟组、酸蚀液中加氟组、酸蚀后加氟组,粘接托槽后进行冷热循环实验,测定并记录托槽抗剪切强度及黏接剂残留指数计分评估。
3.Result:Theshear bond strengths were negative relative to the roughnes.各组处理后涂底涂剂,与硅橡胶粘结,测试其抗剪切强度,观察其破坏方式。
延伸阅读
剪切强度分子式：CAS号：性质：剪切试验中，试样能承受的最大剪切应力与试样原始横截面积之比，单位MPa。在进行搭接接头强度试验中，就是使试样移动部分与静止部分呈完全脱离状态所需之最大负荷。测定材料的剪切强度通常可以用扭转试验来进行；层压材料的层间剪切强度可由专门的剪切弯曲试验来进行；搭接接头强度试验用专门的试验片来进行，以检验粘接材料的粘接性能。构件在实际工作条件下的受力情况是复杂的，造成材料破坏的原因也是多方面的，剪切破坏是其破坏形式之一。所以剪切强度这一物理量仅是材料的力学特性之一。
